|
● Pulse Air Cooling Green Laser-PLA introduction
PLA (Pulse Air Cooling Laser) adopted laser diode as pumping source to stimulate the laser material Nd: YAG to export laser of 532nm. It is air-cooling and the output of laser is stable with ideal facula mode.
● Main features
| ★ |
High-peak power, ultrashort pulse width. |
| ★ |
Ideal facula mode, reliable laser performance, energy ranges within 5%. |
| ★ |
Compatible to many kinds of LD pumping source, easy to be integrated. |
| ★ |
Integrated air cooling solution, no particular requirements to the environment, pollution-free. |
| ★ |
Built-in temperature protection function to keep the laser system safe. |
| ★ |
Integrated compact design, easy to operate. |
● Specifications
| Model |
PLA-Ⅰ |
PLA-Ⅱ |
PLA－Ⅲ |
| Laser medium |
Nd:YAG |
Nd:YAG |
Nd:YAG |
| Cooling |
Air cooling |
Air cooling |
Air cooling |
| Laser Class |
Class 4 |
Class 4 |
Class 4 |
| Wave Length |
532nm |
532nm |
532nm |
| Output Power |
1W |
2W |
3W |
| Laser frequency |
1KHz |
2KHz |
3KHz |
| Single Pulse Energy |
>0.6mJ@1KHz |
>0.6mJ@2KHz |
>0.6mJ@3KHz |
| Pulse Width |
<10ns |
<10ns |
<10ns |
| Beam Diameter |
0.9mm |
0.9mm |
0.9mm |
| Laser Beam M2 |
<1.5 |
<1.5 |
<1.5 |
| Working Humidity |
Non-condensing |
Non-condensing |
Non-condensing |
| Working Temperature |
15℃～30℃ |
15℃～30℃ |
15℃～30℃ |
| Storage Temperature |
10℃～45℃ |
10℃～45℃ |
10℃～45℃ |
● Application
PLA series high-peak power laser system, is not only used for crystal, glass and acryl's subsurface engraving, but also for surface marking in metal or nonmetal materials. It is widely used in crystal, glass, acryl's subsurface engraving and surface marking industry of mobile phone, mould, sheet metal machinery etc. Tontop welcome customers' requests on OEM and ODM production.
|
